The actuator is a lock and release unit used on a high-performance military jet. It releases a drogue parachute coming off the aft section of the aircraft just after landing.
The tail rotor actuator is installed on the rear end of a heavy-lift transport helicopter. It operates the angle-of-attack rear rotor blades and prevents the turning of the tail rotor in the air system. It is equipped with a thermal overload protection system.
The Stick Position Augmentation System (SPAS) features an electric actuator that, as a function of airspeed and collective pitch, introduces an aft cyclic control input as airspeed increases.
The actuator is used for opening the hatch, supported by a gas spring. It was designed with a reversible ball screw, transmission spur gear, bearings, and a permanent magnet DC motor.
The ramp actuators are responsible for moving the ramp on the NH90 helicopter. They were designed with a reversible ball screw, transmission spur gear, bearings, and a permanent magnet DC motor.
The actuator is used to trim the pitch elevator wing flap. It uses two independent permanent magnet DC motors and is designed in a “Fail-safe” layout with a dual static load path and friction clutch.
A special purpose power supply harness is manufactured by EME experts to secure the safe operation of oxygen masks for troops on board of the A400M military aircraft.
EME offers build-to-print and build-to-specification manufacturing of electrical wiring harnesses and cables. Our passenger entertainment harnesses (PES) are of utmost quality and delivered on-time.
As a lead supplier of floor-to-floor harnesses, our products are used in today’s most modern aircraft cabins. EME excels in time-to-market and quality on both build-to-print and build-to-design basis.
As a lead supplier of floor-to-floor harnesses, our products are used in today’s most modern aircraft cabins. EME excels in time-to-market and quality on both build-to-print and build-to-design basis.
As a lead supplier of floor-to-floor harnesses, our products are used in today’s most modern aircraft cabins. EME excels in time-to-market and quality on both build-to-print and build-to-design basis.
It takes patience, precision, and commitment to manufacture high-complex harnesses in series production for one of the most successful business jet aircraft. We are proud to be a major part of it.
